G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.
Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.
The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120-ohm High-Speed Adapters support data rates to 8 Mbps.
These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.
Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.
Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.
The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.
The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.
Choose from models that support 2.048-Mbps or 8-Mbps speeds.
2.048-Mbps models can be ordered with 1.6/5.6 dual-coax connectors.
Features transformer isolation for protection against ground loops.
Converts bidirectionally between G.703 balanced and unbalanced interfaces.
Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.
Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.
Solve mismatches between coax and twisted-pair equipment.
https://www.trivoshop.com/black-box-g-703-balun-75-120-ohm-2-048-mbps-female-ets3531121216933Black Box G.703 Balun - 75-120-ohm, 2.048 Mbps, Femalehttps://www.trivoshop.com/media/catalog/product/8/5/85873032.jpg73.8873.88USDOutOfStock/Accessories/Accessories/Signal Splitters/Amplifiers12203<p>G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.</p> <p>Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.</p> <p>The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120-ohm High-Speed Adapters support data rates to 8 Mbps.<br /><br />These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.<br /><br />Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.<br /><br />Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.<br /><br />The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.<br /><br />The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.</p><br><ul><li>Choose from models that support 2.048-Mbps or 8-Mbps speeds.</li><li>2.048-Mbps models can be ordered with 1.6/5.6 dual-coax connectors.</li><li>Features transformer isolation for protection against ground loops.</li><li>Converts bidirectionally between G.703 balanced and unbalanced interfaces.</li><li>Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.</li><li>Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.</li><li>Solve mismatches between coax and twisted-pair equipment.</li></ul>00add-to-cartsku:ETS3531121description:<p>G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.</p> <p>Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.</p> <p>The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120-ohm High-Speed Adapters support data rates to 8 Mbps.<br /><br />These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.<br /><br />Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.<br /><br />Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.<br /><br />The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.<br /><br />The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.</p><br><ul><li>Choose from models that support 2.048-Mbps or 8-Mbps speeds.</li><li>2.048-Mbps models can be ordered with 1.6/5.6 dual-coax connectors.</li><li>Features transformer isolation for protection against ground loops.</li><li>Converts bidirectionally between G.703 balanced and unbalanced interfaces.</li><li>Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.</li><li>Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.</li><li>Solve mismatches between coax and twisted-pair equipment.</li></ul>price:73.880000weight:0.100000image:/8/5/85873032.jpgsmall_image:/8/5/85873032.jpgthumbnail:/8/5/85873032.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-30 01:54:43updated_at:2022-12-30 23:06:42country_of_manufacture: custom_layout:No layout updatesmsrp:73.880000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/5/85873032.jpgtax_class_id:Taxable Goodsproduct_name:G.703 Balun - 75-120-ohm, 2.048 Mbps, Femalewidth:1.7"product_type:Video Balunheight:0.8"manufacturer_part_number:MT242A-Fcountry_of_origin:United Stateslimited_warranty:1 Yearbrand_name:Black Boxdepth:2.7"environmental_certification:WEEE,RoHSenvironmentally_friendly:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Nosw_featured:Nosku:ETS3531121description:<p>G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.</p> <p>Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.</p> <p>The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120-ohm High-Speed Adapters support data rates to 8 Mbps.<br /><br />These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.<br /><br />Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.<br /><br />Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.<br /><br />The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.<br /><br />The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.</p><br><ul><li>Choose from models that support 2.048-Mbps or 8-Mbps speeds.</li><li>2.048-Mbps models can be ordered with 1.6/5.6 dual-coax connectors.</li><li>Features transformer isolation for protection against ground loops.</li><li>Converts bidirectionally between G.703 balanced and unbalanced interfaces.</li><li>Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.</li><li>Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.</li><li>Solve mismatches between coax and twisted-pair equipment.</li></ul>price:73.880000weight:0.100000image:/8/5/85873032.jpgsmall_image:/8/5/85873032.jpgthumbnail:/8/5/85873032.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-30 01:54:43updated_at:2022-12-30 23:06:42country_of_manufacture: custom_layout:No layout updatesmsrp:73.880000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/5/85873032.jpgtax_class_id:Taxable Goodsproduct_name:G.703 Balun - 75-120-ohm, 2.048 Mbps, Femalewidth:1.7"product_type:Video Balunheight:0.8"manufacturer_part_number:MT242A-Fcountry_of_origin:United Stateslimited_warranty:1 Yearbrand_name:Black Boxdepth:2.7"environmental_certification:WEEE,RoHSenvironmentally_friendly:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Nosw_featured:Nosku:ETS3531121description:<p>G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.</p> <p>Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.</p> <p>The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120-ohm High-Speed Adapters support data rates to 8 Mbps.<br /><br />These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.<br /><br />Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.<br /><br />Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.<br /><br />The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.<br /><br />The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.</p><br><ul><li>Choose from models that support 2.048-Mbps or 8-Mbps speeds.</li><li>2.048-Mbps models can be ordered with 1.6/5.6 dual-coax connectors.</li><li>Features transformer isolation for protection against ground loops.</li><li>Converts bidirectionally between G.703 balanced and unbalanced interfaces.</li><li>Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.</li><li>Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.</li><li>Solve mismatches between coax and twisted-pair equipment.</li></ul>price:73.880000weight:0.100000image:/8/5/85873032.jpgsmall_image:/8/5/85873032.jpgthumbnail:/8/5/85873032.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-30 01:54:43updated_at:2022-12-30 23:06:42country_of_manufacture: custom_layout:No layout updatesmsrp:73.880000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/5/85873032.jpgtax_class_id:Taxable Goodsproduct_name:G.703 Balun - 75-120-ohm, 2.048 Mbps, Femalewidth:1.7"product_type:Video Balunheight:0.8"manufacturer_part_number:MT242A-Fcountry_of_origin:United Stateslimited_warranty:1 Yearbrand_name:Black Boxdepth:2.7"environmental_certification:WEEE,RoHSenvironmentally_friendly:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Nosw_featured:NoBlack BoxUnited States2022-09-30 01:54:43-- Please Select --No layout updates2.7"<p>G.703 7-120 ohm Balun 2.048 Mbps, Female. Features transformer isolation for protection against ground loops. Models support 2.048-Mbps Use G.703 75-120-ohm Adapters to connect your G.703 network to your shielded twisted-pair equipment. These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.</p> <p>Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too. Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.</p> <p>The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors. The G.703 75 - 120-ohm High-Speed Adapters support data rates to 8 Mbps.<br /><br />These adapters address the open network provision (ONP) requirement that European post, telephone, and telegraph (PTT) authorities offer 120-ohm twisted-pair terminations to their customers.<br /><br />Use the adapters to convert the balanced G.703 signals from your bridges and routers to unbalanced G.703 signals. So you can use your 75-ohm coax hardware and communicate with 100-ohm or 120-ohm twisted-pair equipment. The adapters convert signals bidirectionally, too.<br /><br />Setup is super easy. Just plug in the adapters. If needed, you can configure the shield connection between the 75-ohm and twisted-pair interfaces.<br /><br />The G.703 75-120 Adapters support E1 data rates to 2.048 Mbps. For sending TX and RX signals over STP cable, order the MT256A-F, which has 1.6/5.6 dual-coax connectors.<br /><br />The G.703 75-120 High-Speed Adapters support data rates to 8 Mbps.</p><br><ul><li>Choose from models that support 2.048-Mbps or 8-Mbps speeds.</li><li>2.048-Mbps models can be ordered with 1.6/5.6 dual-coax connectors.</li><li>Features transformer isolation for protection against ground loops.</li><li>Converts bidirectionally between G.703 balanced and unbalanced interfaces.</li><li>Make bidirectional G.703 balanced and unbalanced conversions and protect against ground loops.</li><li>Make 75-ohm (dual-coax) and 120-ohm (twisted-pair) network connections.</li><li>Solve mismatches between coax and twisted-pair equipment.</li></ul>YesWEEE,RoHSNoNoNo0.8"/8/5/85873032.jpgYesYes1 YearMT242A-F73.880000Use configBlock after Info ColumnNo layout updates73.880000Price RangeG.703 Balun - 75-120-ohm, 2.048 Mbps, FemaleVideo BalunTogetherETS3531121/8/5/85873032.jpgEnabledNo/8/5/85873032.jpgNoTaxable Goods/8/5/85873032.jpg2022-12-30 23:06:42YesCatalog, Search0.100000Yes1.7"